top of page
ProLink Property Support logo
Book a Call
ProLink Property Support logo

Overflowing Bin Stores in Blocks of Flats: How Managing Agents Can Fix Them for Good

Writer: The ProLink Team
The ProLink Team
Nov 9
5 min read

Updated: 4 days ago

Few things generate resident complaints faster than a bad bin store. Lids that won't close, bags on the floor, a sofa wedged by the door and a smell that drifts into the entrance hall. For managing agents, RTM companies and RMCs, the bin store is often the first thing a resident, buyer or visitor sees, and the first thing they judge the management on.


The good news is that most bin store problems have a small number of causes, and each one has a practical fix. This guide walks through them.


overflowing bins that are managed by prolink

Why bin stores go wrong


Before booking a one-off clean or clearance, work out which of these is driving the problem. Usually it is more than one.


  • Not enough capacity. The number or size of bins hasn't kept pace with occupancy, or recycling bins are too small so residents put everything in general waste.

  • Missed or unreliable collections. The council or private waste contractor misses a day, can't get access, or refuses to empty contaminated recycling.

  • Contamination. The wrong items in recycling bins can lead to them being left unemptied, which quickly causes overflow.

  • Bulky items. Mattresses, furniture and white goods left beside the bins, often after a move-out.

  • Poor layout and signage. Residents can't tell which bin is which, the store is badly lit, or the door doesn't shut properly.

  • No one owning the problem. Everyone assumes someone else will report it.


Step 1: Inspect and record


Visit the bin store on, or just before, collection day and again a day or two after. Take dated photos and note:


  • how many bins there are, their sizes and what each is for

  • how full they are before collection, and whether they were emptied

  • any bulky items, and how long they have been there

  • the state of the floor, drainage, lighting, door and lock

  • any signs of pests


Two or three visits like this tell you far more than a single complaint email, and give you evidence if you need to raise things with the council or a contractor.


Step 2: Check collections and capacity


Find out who collects the waste and on what schedule. For many blocks it is the local council; some developments use a private contractor. Check whether the number and type of bins matches what the block actually produces.


Waste rules in England have also changed. Under the government's Simpler Recycling reforms, from 31 March 2026 councils in England are expected to collect the core dry recycling streams and weekly food waste from all households, including flats and communal properties. Some councils have transitional arrangements that allow a later start date for food waste collections, though dry recycling still needs to meet the March 2026 deadline. Check your council's position, as this may change the bins and space your block needs.


If collections are being missed, log every one with the date and photos and report it through the council's or contractor's proper channel. A clear record makes it much harder for repeated misses to be brushed aside.


Step 3: Deal with bulky items quickly


Bulky items left in a bin store attract more of the same. They are also a fire risk: mattresses, furniture and bags of rubbish are combustible, and piled items can block doors or escape routes. The bin store should be covered in the block's fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005. If problems keep coming back, flag them to whoever is responsible for that assessment. This is general guidance, not legal advice — check the Order and your own fire risk assessment for your block.


Agree a simple rule: anything bulky is reported and arranged for removal within a set number of days.


Options usually include the council's bulky waste service (often chargeable and with limited slots) or a licensed waste contractor. Whoever carries out the removal, make sure they hold a valid waste carrier registration and that you receive a waste transfer note. As the party arranging the removal, you have a duty of care to make sure waste is handled legally.


Step 4: Fix the store itself


Small physical changes make a big difference:


  • clear, picture-based signage showing what goes in each bin

  • working lighting, ideally on a sensor

  • a door that closes and locks properly, with access for collection crews

  • a floor that can be washed down and drains that aren't blocked

  • a periodic clean to tackle smells and pests


Keep escape routes and doorways clear at all times. Overflowing bags and dumped items that block a door or corridor should be treated as urgent, not as something to wait for the next planned clean.


If repairs are needed, treat them like any other communal repair: raise the job, get it quoted, and track it through to completion. Our guide to managing contractor access for repairs covers how to get that done smoothly, and our contractor performance guide helps you keep standards up once the work is underway.


Step 5: Tell residents, and keep telling them


Most residents want a clean bin store. They just need to know the rules. Send a short notice explaining collection days, what goes in each bin, how to dispose of bulky items, and how to report problems. Repeat it after any change, and include it in welcome packs for new residents and tenants.


Keep the tone helpful rather than accusatory. A friendly reminder with photos of what "good" looks like tends to work better than a stern warning.


Step 6: Make someone responsible


The single biggest fix is ownership. Decide who checks the bin store, how often, and what happens when they find a problem. A short routine, such as a weekly photo check, a clear reporting route for residents and an agreed timescale for arranging clearances, stops small issues becoming a monthly complaint.


It is also worth saying so in notices to residents. Repeat clearances and pest treatments add to the service charge. Fixing the root cause — capacity, collections, contamination and ownership — protects leaseholders' money, and agents can say that clearly when they explain why the rules matter.


Recycling and general waste bins in a covered apartment courtyard, with blue and black bins and clear signs.

How ProLink can help


ProLink works with managing agents, RTM and RMC companies and landlords across the UK. We coordinate the day-to-day work that keeps bin stores under control: logging missed collections, chasing the council or waste contractor, raising and tracking bin store repairs, organising the right contractor when one is needed, and keeping you updated along the way — so your team isn't spending hours chasing a mattress or a missed empty. 700+ jobs coordinated across 25+ blocks.


If your blocks have a recurring bin store problem, talk to us about getting your bin stores under control or call us on 0330 043 6984.


This article is general guidance, not legal advice. Check your lease, local council rules, waste contracts and fire risk assessment for your specific block.

Comments


bottom of page