top of page
ProLink Property Support logo
Book a Call
ProLink Property Support logo

Property Compliance Inspection: A UK Portfolio Health Check

Writer: The ProLink Team
The ProLink Team
Nov 10
5 min read

Updated: 3 days ago

 What a property compliance inspection should cover


Property Compliance Inspection: A UK Portfolio Health Check

A property compliance inspection is a structured check that your safety paperwork is complete and your buildings match it. It has two halves: a desktop audit of certificates, reports and records, and a site walk-round to confirm what the files say is actually true. Done every few months on a sample of properties, it finds gaps while they are cheap to fix, not when a resident, insurer or enforcement officer asks. This guide sets out a five-step method for managing agents, landlords and RTM/RMC companies.

This is general information, not legal advice. It covers England.

Property compliance inspection: clipboard with a red amber green score sheet, certificate folder and site photo on a property manager’s desk

What a property compliance inspection should cover


Most people searching this phrase mean one of two things, and a good inspection does both.

  • The file audit. For each property, are the required certificates, reports and assessments present, in date, and complete? Were remedial actions closed? Were copies sent to tenants or residents where required?

  • The site check. Does the building match the paperwork? A fire risk assessment on file means little if a communal door is propped open or an escape route is full of stored items.


This is different from tracking dates. A tracker tells you what’s due. An inspection tests whether what you’ve recorded is accurate. If you need the list of core duties first, see our statutory compliance checklist UK guide.


Why tracking dates isn’t the same as being compliant


A tracker can say “gas check: done” because someone ticked a box, while the record itself is missing, unsigned or ten months old. Tickboxes drift away from reality in three common ways:

  • Date entered, document never filed. The engineer did the work, but the report sits in someone’s email.

  • Report filed, remedial work never closed. A failed or advisory item stays open because nobody owns it.

  • Everything done, nothing sent. The check happened, but tenants or residents never received their copy.


Our guide to tracking property compliance deadlines covers the system side. An inspection is how you check the system is telling the truth.



Step 1: Choose a sample

You rarely need to inspect everything at once. A sensible sample mixes:

  • A few properties picked at random, so the result isn’t flattering.

  • The highest-risk buildings, such as blocks with lifts, communal heating or older fire safety arrangements.

  • Any property with recent changes: a new tenancy, a change of contractor, or a handover from another agent.

  • Properties with a history of complaints or late checks.


For a small portfolio, check every property once a year and a rotating third each quarter. Adjust to suit your size.


Step 2: Test the paperwork

For each property in the sample, open the actual document, not the tracker entry. Check:

  1. Is it there? Gas safety record, electrical report, fire risk assessment for communal parts, alarm checks, legionella assessment and anything else that applies.

  2. Is it in date? Compare the document’s own date with the tracker.

  3. Is it complete? Signed, dated, property address matches, qualified person named.

  4. Were defects dealt with? Look for the follow-up invoice and a clear report.

  5. Were copies sent? Look for the date a copy went to the tenant or resident. For gas, existing tenants must get a copy within 28 days of the check.

  6. Is the right person recorded as responsible? Check the management agreement matches who is actually doing the work.



Keep a simple score sheet: one row per property, one column per document, marked present, missing or out of date.


Step 3: Walk the site

A site check doesn’t need to be technical. Walk the communal areas and a few typical units with a short list of things anyone can observe:

  • Fire doors closing properly and not wedged open. See our guide to fire door checks in blocks of flats.

  • Escape routes clear of stored items, bikes, furniture and rubbish.

  • Communal lighting working, including stairs and entrances.

  • Signage and notices present and legible.

  • Alarms and detectors visible and apparently working, where you have access.

  • Obvious damp, leaks or damage that should already be in your repairs log.

  • Bin stores and shared areas free from build-up that could be a fire or hygiene risk.


Take dated photos. You’re not replacing a competent person’s assessment. You’re checking that the building looks like the report says it does, and flagging anything that needs one.

Imagine a block with a clean fire risk assessment on file and a communal door held open with a wedge. That’s a hypothetical, but it’s exactly the kind of gap a paperwork-only review misses.


Step 4: Rate what you find

A simple red, amber, green rating makes the results usable:

  • Red: a required document is missing, expired or shows an unresolved safety defect. Act immediately.

  • Amber: a document exists but is incomplete, a copy wasn’t sent, or a minor action is overdue. Fix within a set time.

  • Green: present, in date, complete, sent and consistent with what you saw.


Agree your own timescales in advance, for example red items assigned the same day. Whatever you choose, write it down so the standard is the same across properties.



Step 5: Fix it and prove it

An inspection only helps if what it finds gets closed. For each red or amber item, record:

  • What was found and where.

  • Who owns the fix.

  • The target date.

  • The date it was closed and the evidence, such as a new certificate or an invoice.


Re-check the red items yourself after the fix. Then keep the inspection report with the property file, because it shows you looked and acted. Our guide on keeping repair receipts and records explains how to organise job files so evidence is easy to produce.



How often to inspect

There’s no single legal frequency for an internal audit. A practical pattern for most agencies:

  • Quarterly: a rolling sample, with a quick site walk-round for blocks.

  • Annually: a fuller review of every property file.

  • After any trigger: a change of contractor, a handover, a complaint about safety, or a failed check.


If you manage blocks, align the site checks with your existing inspection visits so you aren’t adding extra trips.



Who should do it


Someone independent of the day-to-day work is ideal, because people reviewing their own files tend to see what they expect. That might be a colleague from another team, a director, or an outside support provider. What matters is that the person has the authority to raise issues and a route to get them fixed.



Common mistakes

  • Auditing the tracker, not the documents. Always open the file.

  • Only checking the easy properties. Include the awkward ones.

  • Recording findings with no owner. An unowned list gets longer.

  • Treating one clean result as permanent. Compliance is a rolling position.

  • Skipping the site visit. Paperwork can’t tell you a door is wedged open.



Where Prolink can help


A compliance inspection is repetitive and easy to postpone when the team is busy. Prolink Property Support helps managing agents, landlords and RTM/RMC companies with compliance and admin support, including keeping property files tidy so they stand up to a check. To talk through how that could work for your portfolio,



This article is general information, not legal advice. Check the official sources for your situation.

 
 
 

Comments


bottom of page