Leak From the Flat Above? A Managing Agent's Step-by-Step Guide to Water Leaks in Blocks of Flats

Updated: 2 days ago
Few calls arrive faster or with more urgency than "water is coming through my ceiling". In a block of flats, a leak is rarely just one person's problem. It can involve two or three leaseholders, a tenant who has never met the owner upstairs, the building insurer, and a contractor who needs to get into a flat nobody can reach.

For managing agents, RTM companies and RMC directors, the difference between a leak that is sorted in a day and one that drags on for weeks usually comes down to process, not plumbing. Here is a practical, step-by-step approach.
1. Stop the water first, then worry about blame
The first job is to limit the damage. Ask the resident who reported it to:
Turn off electrics in the affected area if water is near light fittings or sockets, and not to touch anything wet and live.
Put down buckets and towels, and move belongings out of the way.
Take photos and short videos of the ceiling, walls and any damaged items, with the date and time.
At the same time, try to reach the flat above. If the source is an overflowing bath or a washing machine hose, a quick knock on the door can stop the leak in minutes. It helps to keep up-to-date contact details for every flat, including absent landlords and their letting agents, so you are not hunting for a phone number while water is still coming through.
If nobody can be reached and the leak is serious, check whether the block's communal stopcock or the flat's supply can be isolated safely. Knowing in advance where every stopcock is, and who holds the keys, saves a lot of time on the day.
2. Trace the source before anyone starts repairs
Water travels. A stain in a ceiling can come from a flat directly above, from a flat two floors up, from a communal pipe in a riser, or from the roof or a blocked gutter after heavy rain. Repairing the ceiling before the source is found usually means paying for the same job twice.
A good leak investigation will normally look at:
Bathrooms and kitchens in the flats above (seals around baths and showers, waste pipes, appliance connections).
Communal pipework, risers and service cupboards.
The roof, flat roof areas, balconies, gutters and downpipes, especially if the leak appears after rain.
Heating systems and pipework running through floors and ceilings.
If the source is not obvious, a specialist leak detection contractor can use moisture meters, thermal imaging or other non-invasive methods to find it without opening up more walls than needed.
3. Work out who is responsible
Once you know where the water came from, you can work out who pays for what. In most blocks this depends on the lease, but as a rough rule:
A leak from inside one flat (a shower seal, an appliance, pipes that only serve that flat) is often the responsibility of that flat's leaseholder.
A leak from the structure, the roof or communal pipework is often the responsibility of the freeholder, RTM company or RMC, and paid for through the service charge.
Always check the lease wording, because it varies from block to block. We cover this in more detail in our guide on who is responsible for repairs in a block of flats.
4. Bring in the insurer early
Many blocks have a building insurance policy that covers escape of water, and some policies include "trace and access" cover for the cost of finding the leak. Contact the insurer or broker early, follow their claims process, and keep everything: photos, contractor reports, invoices and a timeline of who you spoke to and when.
Leaseholders and tenants should also be reminded that building insurance does not usually cover their own belongings. That is a matter for their own contents insurance.
5. Sort access without the back-and-forth
Access is where many leak jobs stall. The contractor needs to get into the flat above, the leaseholder lives elsewhere, and the tenant works shifts. A few things help:
Contact the leaseholder and any letting agent at the same time, in writing, explaining why access is needed.
Offer two or three clear appointment slots rather than asking "when suits you?"
Confirm the booking with everyone involved, including the contractor, the day before.
Most leases include a right of access for repairs, usually with reasonable notice except in an emergency. Our step-by-step guide to managing contractor access goes through this in more detail.
6. Keep residents updated
Residents affected by a leak are often stressed, and silence makes it worse. Short, regular updates go a long way: what has been found, who is coming and when, what happens next. Keep a simple log of every message and visit. If there is a dispute later, or an insurance claim, that record is invaluable.
7. Close the job properly
A leak job is not finished when the water stops. Before closing it, check that:
The source has been repaired and tested.
Ceilings and walls have been given time to dry out before redecoration, where the contractor advises it.
Any making good has been completed and signed off by the affected residents.
Invoices have been allocated correctly, whether to a leaseholder, the service charge or the insurer.
It is also worth noting repeat problems. If the same riser or roof area keeps causing leaks, that is a sign it needs planned works rather than another reactive repair.

How ProLink can help
ProLink is an outsourced property operations team based in Manchester and covering the UK. We coordinate reactive repairs like leaks for managing agents, RTM and RMC companies and landlords: logging the report, arranging trusted contractors, chasing access with residents, keeping everyone updated and making sure the job is closed off properly, so your team is not tied up chasing calls.
If leaks and other reactive repairs are taking up too much of your week, get in touch for a quote or call us on 0330 043 6984.
Over to you
How does your team handle leaks between flats? What's your first step when a resident calls, and how do you deal with access to the flat above? Share your process in the comments below. We'd love to hear what works for other managing agents, RTM companies and landlords.
This article is general guidance, not legal or insurance advice. Always check your lease and insurance policy for the specific rules that apply to your building.





Comments